10pcs 186 50 Lithium Battery Charging Module TP4056 Charging Module 1A with Battery Protection 186 50 BMS and 2A 5V Charge Discharge Module Charging Boost Mobile Power Protection PCB Board Module
Color:Blue 5pcs and black 5pcs TP4056 Charging Module: Inputs with MICRO USB female, can be directly input to do with the phone charger rechargeable lithium battery. And still retains the input voltage wiring pads, can be very convenient DIY. Note: The charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will damage directly. Note: The first time you access the battery, it may no voltage between the output OUT + and OUT -, then access 5V voltage charge your energy can activate the protection circuit, and the battery from the B+ B-, then draw a line on the short open also need recharged to activate the protection circuit. Note that the charger must be able to output 1A or more to do when using a mobile phone charger input, or may not charge. + MICRO USB female and next - pads for the power input, access 5V. B + positive then the lithium battery, B- then negative lithium batteries. OUT + and OUT- connected to the load, such as positive and negative electrodes connected mobile booster plate or other load. Connect the battery to the B + B-, inserted into the USB female mobile phone charger, the red light is being charged, the green light to full. Features: Input voltage: 5VCharging cut-off voltage: 4.2V ± 1% Maximum charge current: 1000mA Battery over - discharge protection voltage: 2.5V Battery overcurrent protection current: 3A 2A 5V Lithium battery charging protection module: Parameter: Please understand by viewing the picture Note: Charging voltage: DC 4.5V-5.5V (DC 5V recommended) Applications: Car charging retrofit Driving recorder power supply Mobile power Portable devices such as mobile phones and tablets Package Including:5 TP4056 Charging Module5 2A 5V Lithium battery charging protection module
Product Features
- TP4056 Charging Module - Inputs with MICRO USB female, can be directly input to do with the phone charger rechargeable lithium battery, And still retains the input voltage wiring pads, can be very convenient DIY. Charging cut-off voltage: 4.2V 1%; Maximum charge current: 1000mA.
- TP4056 Charging Module - Input voltage: 5V; Battery over-discharge protection voltage: 2.5V; Batteryovercurrent protection current: 3A; Connect the battery to the B+ B-, inserted into the USB female mobilephone charger, the red light is being charged, the green light to full. The charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will damage directly.
- 2A 5V Charge Discharge Integrated Module - MCU users, if you accept a small load KEY can be connected to the microcontroller about 20s to provide a low level allows the module to continue working. Trigger mode: low level trigger (ground) . 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium battery protection function: over-current, overvoltage, over-temperature, short circuit protection.
- 2A 5V Charge Discharge Integrated Module - In discharge mode (The charging mode KEY function is invalid), trigger the KEY port once to open the output; continuously trigger the KEY port twice to close the output. The first time the load is connected, the output is automatically turned on.
- If the load is less than 50MA, the output will be automatically turned off after 30 seconds; if the load is greater than 50MA, the output will be automatically turned on. Allow discharge while charging. (Note: At this time output voltage 4.7 / 5V).
Tags:cocoon
Title - Default Title