Specification:
Model Number:2W025-08
Net weight:295g
Body material:Brass
Oil seal material:NBR
Type : Normally closed
Flow aperture:2.5mm
Thread size:1/4" PT =12mm
Voltage:AC110V
Operating voltage range : ±10%
Mode of action : Direct motion
Working medium : air, water, oil
Working temperature : -5~80 degrees Celsius
Use fluid viscosity: below 20CST
Use pressure : 0~0.8Mpa
Maximum pressure resistance:1.0Mpa
Total Size :74x41x42mm / 2.91x1.61x1.65 inch (LxWxH)
Normally closed type: power on, always off when not energized
Wiring method: two wires are connected casually
Installation method: the bottom indicates the direction of water flow, which in turn will affect the use.
Package Included:1 x Solenoid Valve
Description:
1.The use of a direct-acting diaphragm structure without pressure starts expands its field of use
2.The flat diaphragm structure is reliable in opening and closing, and the service life of the product is enhanced
3.The valve is N / C (normally closed), meaning it will shut down when not powered
4.The valve body made of brass has excellent anti-pressure explosion-proof and corrosion resistance, fast heat dissipation, stable operation and no noise
5.Copper core coil component is sufficient, work response is fast, not easy to heat
6.When installing the solenoid valve, the solenoid valve mark on the valve body should be consistent with the flow of the pipeline fluid
7.This brass solenoid valve has a wide range of applications and is easy to replace broken valves for water, air and other low viscosity fluids
ATTENTION: Valve is not intended to be energized continuously for more than 3 hours. This can lead to burnout of the coil, and malfunctioning of the valve
Tags:$0 - $20,Controls & Indicators,Electronics,Fittings,Hydraulics,Industrial Equipment,Pneumatic Solenoid Valves,Pneumatics & Hydraulics,Pneumatics & Plumbing,Solenoid Valves,Solenoids,Valves
Title - Default Title