Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.
Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.
Tubular-hole rivets often used as pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
Can be used to fasten similar or different materials of multiple work-pieces.
Can be applied to tightly fasten joints together or used in hinged assemblies
Rivets can also be used with a rivet cap to improve appearance of clinched end.
Long length rivets can be applied without buckling or bending the rivet shank.
Inexpensive alternative to threaded fasteners.
Easily adapted for automation.
Specifications:
Product Name : Semi-Tubular Rivet
Material : Iron(Nickel Plated)
Net Weight : 62g
Color : Silver Tone
Shank Diameter(D) : M3(0.12inch)
Length(L) : 3mm(0.12inch)
Hole Diameter(B) : 2.1mm(0.083inch)
Hole Depth(C) : 3mm(0.12inch)
Head Diameter(A) : 6mm(0.24inch)
Head Thickness(H) : 1.5mm(0.06inch)
Package Content :
200pcs(+/-2%)xSemi-Tubular Rivet
Tags:$0 - $20,Cable Glands,Control Cable Accessories,Control Cables,Electrical,Electrical Transmission,Fasteners,Hardware,Power Transmission,Power Transmission Products
Title - Default Title