Product Features:Quad monitor HDMI KVM Swtich
Controls Quad-graphics card computers and other applicable devices using one set of keyboard, mouse with multiple monitors outputs.
Support extended/duplicated /spliced display depending on computer setting.
Support Resolution:480i,480p,720p,1080i,and1080p(HDTV)/4096×216060HZ;
Multiplatform support: Windows 10/7/2000/XP/Vista、Linux and Mac;
Support hot plug & play
Support HDCP and auto EDID for Triple HDMI KVM Switch
Support DDC2 for Quad HDMI KVM Switch
Support auto detection，if one computer is powered off, the switch will automatically switch to the next powered-on computer (default as inactive, please follow Hotkey operation for activation.).
With memory function in case of power-down
Support independent/wireless Mouse Keyboard Switch, even without USB signal input, you can switch the input device easily by keyboard or mouse.
Auto Scan Mode for monitoring all computers/DVR/NVR
With USB2.0 Hub and separate audio & microphone output
How to Set Up:
Power off all devices;
Connect your computers to the Switch using USB audio and HDMI cables included.
Plug your mouse and keyboard to correspondent USB mouse and keyboard port on back panel; for gaming or mechanical keyboard, please plug them into the USB 3.0 HUB on front panel if they did not work well on rear USB ports.
Connect your Monitors to the KVM
Plug in your speaker or microphone if needed;
Power on the KVM switch and then boot all devices;
Set computer display modes to extended display / duplicated display as needed.
Note:The monitors take around 20 seconds to display at first set-up, later on it only takes around 2-3 seconds to display upon switching.
Tags:
Title - Default Title