6.0L Powerstroke Oil Cooler Flush Kit with Blue Aluminum Flush Adapter for Ford 2003-2010 Diesel
Unique Advantages Save money and time Removal of the factory cooling manifold (which routes coolant from the oil cooler into the EGR cooler) is not required. When disturbed, the quick-connect hose between the oil cooler and the EGR cooler will often begin leaking, resulting in a come-back. Our tool does not require tampering with this connection, averting much frustration. Prevent high oil temperatures With our kit, the oil cooler can be back-flushed in less than an hour. By directing water flow in the opposite direction of normal travel, contaminants are dislodged and, in most cases, the cooler is returned to like-new effectiveness. Can be re-used over and over Can be re-used over and over again - the vehicle is not altered, and there is no need for any part of the tool to remain on the vehicle. Instruction: 1. Drain the vehicle's cooling system completely.2. Remove the rear coolant manifold cover (shown at black arrow in picture above) from the top of the oil cooler cover by removing (2) T-30 Torx head bolts. 3. Install the flush adapter (show in blue above) in place of the coolant manifold cover and replace the two T-30 bolts. 4. Thread the 45 degree brass elbow into the flush adapter as shown above. 5. Thread the flush hose assembly into the into the 45 degree adapter. See illustration below.6. Remove the lower radiator hose and place a large clean receptacle under the open end of the hose. Read more Features: Constructed from high quality materialSignificantly lower cost than other alternatives.Easy-to-use flush tool kitKit Includes: (1) Flush adapter, required brass fittings, hose. Features: Constructed from high quality materialSignificantly lower cost than other alternatives.Easy-to-use flush tool kitKit Includes: (1) Flush adapter, required brass fittings, hose. Features: Constructed from high quality materialSignificantly lower cost than other alternatives.Easy-to-use flush tool kitKit Includes: (1) Flush adapter, required brass fittings, hose. Features: Constructed from high quality materialSignificantly lower cost than other alternatives.Easy-to-use flush tool kitKit Includes: (1) Flush adapter, required brass fittings, hose.
Product Features
- Works on EGR cooler equipped and EGR deleted trucks
- Prevent high oil temperatures which cause expensive fuel system and engine failures
- Save money and time by back-flushing your 6.0L oil cooler rather than replacing it
- Can be re-used over and over - no need for any part of the kit to remain on the vehicle
- If you're not 100% satisfied with this kit, simply return it for a full refund in 30 days, guarantee with 1 YEAR warranty.
Tags:cocoon
Title - Default Title