AC Digital Meter, Walfront PEACEFAIR PZEM-022 AC 80-260V 100A LCD Display Multimeter Digital Meter Power Energy Voltage Current Frequency Test with Closed Type CT

2024-03-20 20:38:45










AC Digital Meter, Walfront PEACEFAIR PZEM-022 AC 80-260V 100A LCD Display Multimeter Digital Meter Power Energy Voltage Current Frequency Test with Closed Type CT

Specification: Brand:PEACEFAIR Model: PZEM-022 Working voltage: 80 ~ 260VAC Test voltage: 80 ~ 260VAC Current:100A Rated power:100A/22000W Operating frequency: 45-65Hz Measurement accuracy: 1.0 grade Size: 952.5cm/3.521in Wire length:19cm/7.5in Weight: Approx.110g/3.9oz Key function: Set power alarm threshold Step1: Long press the key until the LCD screen display"SET CLr", then release the key to enter the setting state Step2: Power window display the current power alarm value and the last digit begin to flash, then you can short press to plus 1, when there is no operating over 3 seconds, it will switch the digit position automatically, the setting method is as same as the above. Step3: After finish the setting, long press the key over 5 seconds will store automatically and exit, the range of active power threshold is 0.0~2.5kW. Package list: 1 x AC Multifunction Digital Meter 1 x Closed Type CT

Product Features

  • ELECTRICAL PARAMETER MEASURE: Electrical parameter measurement function (voltage, current, active power, energy, frequency, power factor). Overload alarm function (over power alarm threshold, backlight and power flashing to alarm).
  • POWER ALARM THRESHOLD PRESET: Power alarm threshold preset function (can set power alarm threshold). The energy can be reset use the key. Store data when power off. Large-screen LCD Backlight function.
  • BACKLIGHT CONTROL FUNCTION: Short press the key to turn on or off the backlight, the backlight has memory function, it can store the on or off state when power off.
  • RESET ENERGY FUNCTION: Step1: Long press the key for 5 seconds until the energy value flash, then release the key. Step2: Short press the key again, then the energy value is cleared and exit the reset flashing state. Step3:If there is no operation on the key within 5 seconds, it means the energy value is not cleared and will exit the reset state.
  • PLEASE PAY ATTENTION: 1. This module is suitable for indoor, please do not use outdoor. 2. Applied load should not exceed the rated power. 3. Wiring order can't be wrong.

Tags:dingo

Title - Default Title

如果有任何关于网站的意见,可以QQ联系或者发邮箱。

tags - tags - tags - tags - tags - tags - tags - tags - tags - tags - tags - tags - tags - tags - tags -