AUKUYEE CNC Shield Contoller Kits for 3D Printer, Includes CNC Shield V3.0,Nema 17 Stepper Motor, A4988 Stepper Motor Driver, Heat Sinks, Perfectly Compatible with GRBL
Read more CNC Shield V3.0 features: Latest CNC Shield Version 3.0. GRBL 0.8c compatible. (Open source firmware that runs on an Arduino that turns G- code commands into stepper signals) 4-Axis support(X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13) 2 x End stops for each axis(6 in total), Spindle enable and direction Coolant enable Stepper drivers Uses removable Pololu A4988 compatible stepper drivers. Jumpers to set the Micro-Stepping for the stepper drivers. Compact design Stepper Motors can be connected with 4 pin Molex connectors or soldered in place. Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.) Stepping Motor The most popular Nema 17 model with 1.8 deg. step angle (200 steps/revolution) 0.4A rated current/phase, allowing for a holding torque of 26Ncm(36.8oz.in) Connection:Black(A+), Green(A-), Red(B+), Blue(B-) Stepping Motor Specification: Cable length: 11.8 inches Phase Resistance: 30ohms Inductance: 37mH+/-20%(1KHz) Frame Size: 42 x 42mm Body Length: 34mm Shaft Diameter: 5mm Front Shaft Length: 20mm D-cut Length: 15mm Number of Leads: 4 Lead Length: 300mm Weight: 230g Kit list: 1x CNC Shield V3.0 1x Keyestudio 4x A4988 driver 1x USB cable 1x Nema 17 stepping motor QD03 QD04 QD05 QD06 QD07 QD07C Holding Torque 84oz.in (59 Ncm) 36.8oz.in (26Ncm) 64oz.in(45Ncm) 36.8oz.in (26Ncm) 56.6oz.in(40Ncm) Rated Current/phase 1.7A 2.0A 2.0A 0.4A 1.7A 1.7A
Product Features
- CNC Shield V3.0 Features - Latest Version 3.0, GRBL 0.8c compatible, 4 Axis supported and 2 end stops for each axis.
- Compact design - Stepper motors can be connected with 4 pin molex connectors or soldered in place.
- Stepper Drivers - Uses removable Pololu A4988 compatible stepper drivers, jumpers to set the Micro-Stepping for the stepper drivers
- Stepping Motor Included - Nema 17 model, holding torque of 26Ncm(36.8oz.in), 12V/0.4A and 1.8 deg.step angle(200 steps/rev)
- Technical support - Our technical support team is on standby to provide solutions to your questions, please feel free to contact us.
Tags:workwarehouse
Title - Default Title