Baby Gate Guru Extra Long M8 (8mm) Stair Banister Adapter Y-Spindle Rods 2 Pack for Pressure Mounted Baby and Pet Safety Gates (8mm, White)
At Baby Gate Guru, we've made it our mission to make installing your safety gates a more convenient and stylish experience. With our line of extra long spindle rod and wall protector accessories you can now fit your pressure mounted gates in more places with ease, in colors that best match your gate and decor, and with materials that won't damage your walls. Create a tight, secure fit on multiple surfaces Extra Long These banister spindle rods measure 12cm (4.7 inches) in length, from the tip of the threaded bolt to the part that makes contact with your banister. Finding the right fit for your staircase can be difficult, so give yourself the best chance to achieve a sturdy and reliable fit with extra long spindle rods. Rubbery textured end helps grip the surface without causing damage Matching adjustment wheel allows for an adjustable length and tight, secure fit Banister Y-Spindle Rods For Baby and Pet Safety Gates This 2 pack of pressure gate Y-spindle rods from Baby Gate Guru is designed as an adapter to help your gate fit banisters at the bottom of stairways. It can be used against banisters, railings, balustrades, and other round supports. It can also be used on angled wall corners or other unorthodox places where a Y-shape spindle rod will fit. Available in 2 standard sizes. M8 fits gates with a 7-8mm diameter opening. M10 fits gates with a 9-10mm diameter opening. See compatibility info below. M8 bolt diameter 12cm (4.7 inches) long Works with pressure mounted gates Read more Check Your Compatibility Brands Compatible with M8 (8mm) Spindle Rods Regalo Summer Infant Carlson Top Paw Evenflo Don't See Your Brand? If you have any of the following brands you will want to change to the M10 (10mm) size instead: Dreambaby, Munchkin, North States (Supergate), Bindaboo, Safety 1st, Lindam, Baby Dan. Brands listed here are not affiliated with this product and are listed solely for compatibility purposes. Finding The Right Parts For Your Gate Is Your Gate Pressure Mounted? These spindle rods are designed to be used with pressure mounted gates only. Pressure mounted gates are installed by tightening the spindle rods against the surrounding walls and objects, creating tension that holds the gate securely in place. By contrast, hardware mounted gates are installed by screwing manufacturer-provided hardware into the walls, then connecting the gate. Measuring Your Gate If you are not sure which size will fit your pressure mounted gate, you can measure the holes that the spindle rods go into to determine the correct size yourself. An M8 screw's true diameter will measure slightly less than 8mm, so will fit nicely into a 7-8mm hole. An M10 screw's true diameter will measure slightly less than 10mm, and will fit nicely into a 9-10mm hole. Read more Use In Combination With Baby Gate Guru Extra Long Spindle Rods To install your gate at the bottom of your stairs, use 1-2 Baby Gate Guru Banister Y-Spindle Rods against your stair banisters, depending on the design of your staircase, and normal spindle rods for the remaining flat surface contact points. If you need replacement normal spindle rods or your existing spindle rods will not reach, use Baby Gate Guru Extra Long Spindle Rods (sold separately) to help extend the maximum width of your gate. Note: Pressure mounted gates are not suitable for use at top of staircases. Only certified hardware-mounted gates should be used in that location. Use a maximum of 2 banister adapters for each installation, to ensure a strong fit. Use standard spindle rods for connections on remaining flat surfaces. Always follow your gate manufacturer’s installation instructions and ensure a strong fit before use. Read more 2 Packs Each set comes with 2 banister spindle rods. Depending on your staircase design, it's possible you'll only need 1. However, if your staircase has round banisters on both sides, or both the top and bottom of a single side, you will need both Y-spindles. Extra Length Staircase openings are wide and can often be difficult to span. Having extra long banister spindle rods gives you more play, making it possible to install your gate where you previously couldn't or, in any case, making for an easier, more secure installation. Rubbery Padded Surface A rubbery padded end piece wraps all the way around the metal, an important factor designed to prevent damage to wooden banisters. The padded end pieces also have textured dots to help prevent slipping and create a secure grip against many types of surfaces. Quality Manufacturing Quality steel is welded together on smooth, non-threaded surfaces to create the strongest connection. Injection molded adjustment wheels provide a strong, easy to grip surface for tightening your installation easily without additional tools. Read more M8 Extra Long Spindle Rods (8mm) M10 Extra Long Spindle Rods (10mm) M8 Extra Long Banister Y-Spindle Rods (8mm) M10 Extra Long Banister Y-Spindle Rods (10mm) Pressure Gate Wall Protectors Colors Available White, Bronze, Black White, Bronze, Black White, Bronze, Black White, Bronze, Black White, Bronze, Black Used With Walls, Doorways, Flat Surfaces Walls, Doorways, Flat Surfaces Staircases, Banisters, Angled Wall Corners Staircases, Banisters, Angled Wall Corners Walls, Doorways, Flat Surfaces Regalo compatible ✓ ✓ ✓ Summer Infant compatible ✓ ✓ ✓ Carlson compatible ✓ ✓ ✓ Dreambaby compatible ✓ ✓ ✓ Munchkin compatible ✓ ✓ ✓ North States (Supergate) compatible ✓ ✓ ✓
Product Features
- BANISTER ADAPTER: Padded Y-spindle rods are designed to grip onto large and small banisters and railings at the bottom of stairs, as well as wall corners and other unorthodox shapes. Texture dots on padded end pieces help ensure a snug no-slide grip.
- 8MM SIZE: This 2 pack of M8 spindle rods is designed to fit pressure mounted gates with an 8mm hole. Please make sure you have the correct size for your gate.
- COMPATIBLE WITH: Pressure gates from Regalo, Summer Infant, Carlson, Top Paw, and Evenflo. Don't see your gate's brand? Try switching to the M10 (10mm) size.
- EXTRA LONG: Each spindle rod measures 12cm (4.7 inches) long, giving it an extended length that will help reach your stair banister and ensure a sturdy and reliable fit. Capable of installing in more places than shorter alternatives.
- ELEGANT COLORS: Choose between classic white to match your white or neutral gate, or elegant bronze to complement your bronze or black gate. Colors are on both the rotating nut piece and the soft rubbery end for maximum elegance.
Tags:cp507
Title - Default Title