Brine Shrimp Eggs Incubator 380ml Plastic Aquarium Artemia Eggs Hatchery Kit Fish Tank Shrimp Breeding Hatcher
Specification:Condition: 100% Brand NewCapacity: 380mlWeight: Approx. 279gHeight: Approx. 28cm/11.02inchUsing instructions:1. Inject the treated water to the standard water level in the incubator tank, and add about 10g kosher salt to pre-dissolve2. The air pump is connected to the air inlet hole at the bottom of the incubator, and the air volume is adjusted to an appropriate amount. The ideal temperature is 28 ~ 30℃3. Add about 3 to 5 g of shrimp eggs, can hatch smoothly after about 36 ~ 48 hours4. Collection operation: after the eggs hatch, stop pumping and let stand for about 10 ~ 15 minutes. When the shrimps sink to the bottom and the shells float, the larvae of shrimps can be collected from the original air inlet (air adjusting valve) at the bottom of the incubator, and then the larvae can be fed5. Please store them in the refrigerator. Applicable: dry, frozen shrimp eggs are applicableIncubation steps:1. Add water 300 ml2. Add half teaspoon of sea salt3. Add 1 - 2 tablespoons of shrimp eggs4. Connect air pump to open distributor5. Waiting to hatch6. Turn off the distributor and pull out the tracheaIncubation temperature:Shrimp eggs can hatch in the range of 7-30 ℃, and the incubation speed is accelerated with the increase of temperatureThe preference incubation temperatureis 25-30 ℃.Package Included:1 x Check Valve1 x Suction Cup Fixed Holder1 x Shrimp IncubatorNotice:1. Air supply port at the bottom of shrimp incubator, please adjust the air input. Too much or too little air input will affect the hatching time and survival rate of shrimp eggs. Please adjust the air input by air switch.2. The air supply port at the bottom is connected with a simple check valve, which can effectively prevent water backflow in the incubator.
Product Features
- ApplicationThis set of hatching tool is specially designed for hatching all dry frozen shrimp eggs(egg is not included in the package), easy to operate and use.
- PracticalCan be directly into the harvest shrimp eggs, sea salt and water. Simple, practical, convenient to hatch shrimp for feeding fish.
- Unique FunctionAdding a air pump to use with the hatchery, meanwhile, the air outlet of the hatchery can be connected to the airstone, airwood, eggs can be hatched within 36-48 hours.
- Premium MaterialOur brine shrimp eggs incubator is made of premium plastic material, non-toxic and durable.
- More Hatching TipsPH is important in hatching brine shrimp. A starting pH of 8.0 or higher is recommended.Tanks and brine shrimp hatching equipment should be cleaned and disinfected routinely.
Tags:paw07
Title - Default Title