Current Sensor, ETCR010KD Opening and Closing Direct Current Sensor Leakage Detective Current Detective Leakage Current Detective
Specification: Detection modeopen-and-close CT, on-line installation is particularly convenient. Power source9VDC ± 1VDC (or other power supply: ± 12VDC ± 1VDC or ± 5VDC) Working current20mA max The opening and closing dimension10 mm (the core can be pierced through a wire of less than 10 mm) Range0.0mA ~ 100mA DC Discriminant power0.1 mA DC Accuracy level± 3.0% FS (23 ± 2 ,70% RH below, conductor in the center of clamp) Turn ratio1:800 Signal output 25mV/ 1mA, that is,0 ~ 100mA corresponding output 0 ~ 2.5V (± 12VDC power supply: 50mV/ 1mA) Response speed2 times per second Output line headbrown line _ power input is positive;Yellow line _ alarm control end (high potential light);Blue Line _ Output signal is positive;Black line _ common ground end (power input negative and signal output negative, can be shorted with outer shell) Output lead line length100mm Geomagnetic interferenceabout 3mA The position of the conductorat the center of the opening and closing opening Line voltageDC 600 V below line test Working temperature and humidity-10 ~ 45 ;Under 80% rh Storage temperature and humidity-10 ~ 60 ;Under 70% rh Insulation strengthAC 2 kV/ rms (between core and shell) Package List: 1Main Unit 1Users Manual Note: 1. As different computers display colors differently, the color of the actual item may vary slightly from the above images. 2. Please allow 1-3mm differs due to manual measurement.
Product Features
- HIGH ACCURACYthe resolution ratio is as precise as 0.1A and the accuracy grade is 3.0%FS.(the core can be pierced through a wire of less than 10 mm)
- SIGNAL OUTPUT:25mV/ 1mA, that is,0 ~ 100mA corresponding output 0 ~ 2.5V ( 12VDC power supply: 50mV/ 1mA)
- DETECTION MODE: Open-and-close CT, The opening and closing dimension is 10 mm (the core can be pierced through a wire of less than 10 mm), on-line installation is particularly convenient.
- THE MEASURING RANGE: 0-100mA which is suitable for most scenarios.Discriminant power is 0.1 mA DC. Geomagnetic interference is about 3mA.
- WIDELY USAGE: Applicable for current measurement, monitoring, and protection of the following devices:AC motor,Air compressor,Lighting equipment.
Tags:dingo
Title - Default Title