EZT Shang Ying 3D Printer Extruder Direct Extruder High Temperature Double Gear Dragon Hotend Titan Extruder for Ender 3 Series FDM 3D Printer Upgrade Part, Black JC002

EZT Shang Ying 3D Printer Extruder Direct Extruder High Temperature Double Gear Dragon Hotend Titan Extruder for Ender 3 Series FDM 3D Printer Upgrade Part, Black

★These 1.75mm PLA+ filaments are made of premium PLA material (Polylactic Acid), which boasts complete biodegradation and lower melting temperature, even does not need a heated bed, eco-friendly and safe, with no odor during the printing 1. All of our 3D printer filaments are 100% virgin material, never use recycled material or regrind material 2. Before the mass production, our engineer always do the test to make sure that each batch of new raw materials must be printed by 3D printer. 3. The Laser diameter runs automatically to control the diameter of the filaments and keeps it in a right range of 1.75/3.0mm, and our engineer will adjust it immediately when it alarms to indicate of wrong size, and this unqualified filament will be cut off and never use it. 4. To keep the filaments dry, each roll of filament is packed in a vacuumed polybag with a desiccant inside of it.

Product Features

• Advantages of ExtruderRetain the advantages of Direct extruders,The control of feed ing is more accurate than remote extrusion and more precise back pumping .What s more, the torque requirements for extruded stepper motors are comparatively low, and the material exchange is convenient.
• Overcome the shortcomings of heavy Extruder Usually the extruders of 3D printer is quite heavy,especially the dual-head printer, which has a large inertia in motion and is relatively difficult to accelerate deceleration, so it have to use a lower printing speed to ensure accuracy.But our H2 extruder with a light weight,which can solve this problem easily.
• ultra-strong torque by Multi-gear Feeding Through multi-gear transmission, reached a 2.6:1 torque transmission ratio, ultra-strong torque 260mN .m.
• Applicable models The installation is convenient and the wiring is simple. Suitable for all FDM, I3 3D printers on the market
• High performance of heat dissipationStream-type thermal structure for ultra-efficient cooling.

Tags:workwarehouse

Title - Default Title