Finest Aquatics Waterproof Cable Connector Joiner Joint Submersible Water Feature Pond Koi IP68

2024-05-23 17:55:13




Finest Aquatics Waterproof Cable Connector Joiner Joint Submersible Water Feature Pond Koi IP68

Description

These fully submersible power cable joints are ideal for extending cables for pumps, filters UVs and any other electrical appliance used for ponds or water features. These connectors are IP68 rated, meaning no ingress of dust; complete protection against contact (dust tight) and suitable for continuous immersion in water. This connector is 96mm in length. Installation of the connector: Unscrewing the ends of the connectors will reveal either in the body or attached to the body 3 connection points on either side. Connect plug side of cable to one side and equipment side of cable to the other. Safety Information: As with any kind of electrical modification we always recommend that a qualified electrician is used to install products such as these. We also suggest the use of a multi-meter after installation to ensure installation has been completed correctly. Only use with power cable's that are 0.75mm standard power cable thickness (commonly known as 3 core power cable). It is recommended that you complete regular checks of all included O-Rings. When installing, always follow the markings on the connection points as follows: L = Live cable (Brown) N = Neutral (Blue) Earth Symbol or blank - Earth (Green/Yellow) Always make sure no matter what that the following is correct before proceeding: Live connects to Live Neutral connects to Neutral Earth connects to Earth Reassemble the connector joint. When reassembling each part must be tightened as tight as physically possible to ensure that the O-rings are tight to the power cable.

Features:

  • These fully submersible power cable joints are ideal for extending cables for pumps, filters UVs and any other electrical appliance used for ponds or water features. These connectors are IP68 rated, meaning no ingress of dust; complete protection against contact (dust tight) and suitable for continuous immersion in water.
  • This connector is 96mm in length
  • Please see installation and safety instructions in the full product description below.

Tags:petsuk

Title - Default Title

10Pcs 32mm Inner Dia PE Plastic End Cap Bolt Thread Protector Tube Cover

10pcs 32mm Inner Dia PE Plastic End Cap Bolt Thread Protector Tube Cover Blue

10pcs 32mm Inner Dia PVC Flexible Vinyl Cap Screw Thread Protector Cover Black

10pcs 32mm Inner Dia PVC Flexible Vinyl Cap Screw Thread Protector Cover Red

10pcs 32mm Inner Diameter 90 Degree 2-Way Elbow PVC Pipe Connectors Fittings

10Pcs 32mm Nonslip Gray Plastic Volume Control Rotary Potentiometer Encoder Knob for 6mm Dia Shaft

10pcs 32mm OD 2.5mm Thickness Silicone O Rings Oil Seals Gasket Dark Red

10pcs 32mm Outside Dia 3mm Thickness Industrial Rubber O Rings Seals

10pcs 32mm Plastic Star Head M6x40mm Male Thread Screw on Clamping Knob Grips

10pcs 32mm Spring Type Action Fuel Hose Pipe Low Pressure Air Tube Clip Clamp

19/32 Inch x 32.5Ft Heat Resistant Acrylic Double Sided Adhesive Tape for Touch Screen Repairing 1mm Thickness Clear with Red Protect Film

19/32 Inch x 32.5Ft Heat Resistant Acrylic Double Sided Adhesive Tape for Touch Screen Repairing 2mm Thickness Clear with Red Protect Film

19/32 Inch x 9.5Ft Heat Resistant Acrylic Double Sided Adhesive Tape for Touch Screen Repairing 0.8mm Thickness Clear with Red Protect Film

19/32 Inch x 9.5Ft Heat Resistant Acrylic Double Sided Adhesive Tape for Touch Screen Repairing 1mm Thickness Clear with Red Protect Film

19/32 Inch×98ft Heat Resistant High Temp Tape

19/32"×25/64"×1/5" Electric Motor Carbon Brushes 10pcs

19/32-Inch (15mm) Hose ID Barb Fitting Stainless Steel 3 Way T Shaped Union Home Brew Fitting

19/32-Inch (15mm) Hose ID Barb Fitting Stainless Steel 3 Way T-Shaped Union Home Brew Fitting 2pcs

如果有任何关于网站的意见,可以QQ联系或者发邮箱。

tags - tags - tags - tags - tags - tags - tags - tags - tags - tags - tags - tags - tags - tags - tags -