- Type: #0 (Fit 4mm-6mm Screws)
- Diameter: 6mm / 0.24"
- Hex Shank Size: 6.35mm / 1/4"
- Total Length: 55mm / 2.17"
- Material: High Speed Steel
- Finish: Chrome Plated
- Package Included: 1pcs x Damaged Screw Extractor
Descriptions:
- Can easily remove stripped, broken, painted over, rusted, embedded screws and bolts from wood or metal surface. Suitable for hex bolts, machine screws, wood screws, sheet metal screws, threaded studs etc..
- High speed steel tool has high hardness and toughness, wear resistance and heat resistance. Chrome plated layer has high hardness, good heat resistance, good wear resistance, and good chemical stability.
- Work with a power drill and always use a slow speed. The electric hand drill is recommended. Can not be used with the hammer drill. Quick change 1/4-inch hex shank can be used on power tools more easily and securely.
- Step 1: Use an appropriate drill bit (NOT included) to drill a hole (as deep as possible) in the damaged screw; step 2: install the screw extractor on the electric hand drill; step 3: reverse the extractor to remove the damaged screw.
- Tips: Must be used vertically and at a slow speed when drilling. If the damaged screw has a smooth surface, drill the hole first. The speed needs to be set according to different materials, usually the harder the material, the lower the drilling speed.
Tags:$0 - $20,Hand Tools,Tap Extractors,Taps & Dies,Tools & Home Improvement
Size - 4.32mm,3.45mm,7.0mm,6.35mm,5.73mm