High Voltage Pulse Generator DC 6-12V 0.5-1 Million V Super Arc Pulse Ignition Transformer Boost Step-up Coil Module for Cigarette Lighter (901-c2)
Description: The pulse generator is made of high quality material, it has long use life, high reliability and durability. This module is mainly used for high school science experiment, electronic instrument, negative ion generator, high voltage ignition, DIY science products and more. Specification: Model(Optional): 901-2(work continuously for 10s), 901-c2(work continuously for 1 min) (Note: it is strictly forbidden to exceed working time) Input voltage: DC6-12V Input current: 1A-3A (related to voltage) High pressure type: pulse high and low pressure integrated type Output voltage: approx. 0.5-1 million V(please pay attention to safety when using) Discharge distance between high pressure poles: 10-20mm Output high-voltage wire length: approx.100mm Input power wire length: approx. 100mm (the red wire is positive) Size: 86×25mm/3.4×1in Weight: Approx.63g~72g/2.2oz~2.5oz Package list: 1 × Pulse Generator Note: 1.Avoid high-voltage no-load power supply. (it is necessary to adjust the appropriate distance of the high-voltage cable end before energizing. The distance of the high-voltage cable to pull the arc is directly proportional to the voltage and capacity of the battery used. When measuring arc distance, the test shall be conducted from short to long. 2.Power is strictly forbidden when exceeding the maximum arc distance. As the high voltage energy cannot be released, modules are easily damaged. 3.About the input power: 2pcs 3.7-v lithium battery can be used in series, such as 18650 battery, idle cell phone battery (to remove the protection board, recommended capacity above 2000mAh) or Nickel-cadmium/Ni-mh battery pack, or 6V lead Acid batteries.
Product Features
- [High Quality] The pulse generator is made of high quality material, it has long use life, high reliability and durability.
- [Powerful] After the input of DC 6-12V voltage, a dc high voltage of about 10,000V (about 1-2 cm of arc) can be obtained at the output end, small size and high efficiency.
- [Feature] The boost step-up coil module can generate high temperature and high frequency arc to easily ignite combustible such as smoke, paper and candle. There are two models of pulse generator for choice, including 901-2(work continuously for 10s) and 901-c2(work continuously for 1 min).
- [Good Performance] According to the tesla coil principle, the module outputs high voltage pulse current, thus it will generate the electric arc between the two wires. The peripheral circuit is simple (simply connect the switch, install the battery), the discharge intensity is violent.
- [Application] This module is mainly used for high school science experiment, electronic instrument, negative ion generator, high voltage ignition, DIY science products and more.
Tags:dingo
Title - Default Title