InnoMaker Mini USB Logic Analyzer 24MHz 8 Channel UART IIC SPI Debug for Arduino, Raspberry Pi, FPGA, ARM Board

InnoMaker Mini USB Logic Analyzer 24MHz 8 Channel UART IIC SPI Debug for Arduino, Raspberry Pi, FPGA, ARM Board

InnoMaker Mini USB Logice Analyzer is a higher cost performance device and was designd for Engineer and DIYer. It's small enough, easy to carry and use for most development. Regard to the pinmap design of 8 signal channels, We feature it top half part are '0-1-2-3-GND' channels and upper half part are '4-5-6-7-GND' channels. More convenient than the other USB logice analyzer. Channel: 8 signal channnels + 2 GND channnels Voltage range: Input voltage range: -0.5V to 5.25V Input Low Voltage: -0.5V to 0.8V Input High Voltage: 2.0V to 5.25V Works with 5V, 3.3V, 2.5V, 2.0V systems. May work with 1.8V but not recommended Support signal (Depand on which logice analyzer tools you are using): Async Serial, I2C, SPI, Hide, 1-wire, Atmel SWI, Biss-C, CAN, DMX-512, HD44780, HDLC, HDMI I2S/PCM, JTAG,LIN,MDIO,Manchester, Midi, Modbus, PS/2 Keyboard/Mouse, SMBus, SWD, Simple Parallel,UNI/O Can I draw your attention to below items: 1. The max sampling rate is 24MS/s, just be used for sample and commond singal test. If you want test very high speed or test for more than 8 pins channels , please choose the higher level logic analyzer in our shop. 2. The max sampling rate is 24MS/s, but it will be affected by your USB bandwidth. If you want to work at fully 24MS/s frequency feature, please pull out all the redundant USB devices or use the USB3.0 port of your computer. Usually, If your USB bandwidth could not support for 24MS/s, the logic analyzer tools will provide some indications. Try to reduce the the sample rate speed, such as 10Ms/s , 8Ms/s . It's power enough to cope with a variety ofoccasions. 3. Ensure your computer have enough RAM memory for accept the data send by logice analyzer. Close the useless applications on your system.

Product Features

• 8 Channels usb logic analyzer, each channel sampling rate up to 24MS/s.
• Support Windows 10/8/7, Mac Os, Linux.
• On-board 4 indicator leds for ch0 to ch3. Easy to observe the low speed signal.
• The signal could be analyzed with many standard protocols, to get more straightforward communication data.
• Compatiable with most ready-made logice analyzer tools, such as sigrok PluseView etc.

Tags:dingo

Title - Default Title