JVCC DC-4016R/P Double-Sided Removable/Permanent Tape [Acrylic Adhesive]: 1/2 in. x 60 yds. (Clear)
Size:1/2 in. x 60 yds. (12mm x 55m) JVCC DC-4016R/P Double-Sided Removable/Permanent Tape is a clear polyester double-sided film differentially coated with a removable (low tack) and permanent (high tack) acrylic adhesive. The liner side (the tape exposed once you remove the liner) is coated with a controlled, low tack, clear adhesive system which exhibits moderate adhesion to a variety of surfaces, but has excellent removability. The exposed side (the tape visible once you unwind it from the roll) is coated with an aggressive, high tack, peel, and shear, permanent acrylic adhesive. Both adhesives are excellent in low and moderate temperatures and are resistant to UV, moisture, some solvents, mild acids, oil, and grease. Excellent adhesion to metals, glass, films, paper, and some treated polyolefin. JVCC DC-4016R/P double-sided (AKA double-coated) removable/permanent tape is used as a closure system for reclosable bags, pouches & envelopes; core start-ups and end tabbing of papers, foils, and films; mounting promotional, advertising & point of purchase displays that can easily be removed/replaced/repositioned; temporary holding of packaging and protective materials during shipment; temporary laminating applications; making removable stickers & labels. This tape performs best on non-porous surfaces, such as paper, however, it will also remove cleanly from many porous surfaces, such as non-woven. Testing is strongly recommended. Also approved for Indirect Food Contact (21CFR 175.105). Made in the U.S. If not otherwise specified widths shown in dropdown are in inches. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 12mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the
Product Features
- JVCC DC-4016R/P Double-Sided Removable/Permanent Tape is a clear polyester double-sided film differentially coated with a removable (low tack) and permanent (high tack) acrylic adhesive. Both adhesives are excellent in low and moderate temperatures and are resistant to UV, moisture, some solvents, mild acids, oil, and grease. Excellent adhesion to metals, glass, films, paper, and some treated polyolefin.
- The liner side (the tape exposed once you remove the liner) is coated with a controlled, low tack, clear adhesive system which exhibits moderate adhesion to a variety of surfaces, but has excellent removability. The exposed side (the tape visible once you unwind it from the roll) is coated with an aggressive, high tack, peel, and shear, permanent acrylic adhesive.
- JVCC DC-4016R/P double-sided (AKA double-coated) removable/permanent tape is used as a closure system for reclosable bags, pouches, and envelopes; core start-ups and end tabbing of papers, foils, and films; mounting promotional, advertising & point of purchase displays that can easily be removed/replaced/repositioned; temporary holding of packaging and protective materials during shipment; temporary laminating applications; making removable stickers and labels.
- Carrier/Backing: polyester (PET) film. Adhesive: solvent-based acrylic. Release Liner: siliconized Kraft paper. Thickness: 2.3 mils (carrier, adhesive) 0.5 mils (carrier) 3.2 mils (liner).
- Adhesion: 40 ounces per inch (exposed side) / 16 ounces per inch (liner side). Tensile Strength: 7.5 pounds per inch (longitudinal). Service/Operating Temperature: -40F to 250F. Application Temperature: 50F (minimum). Elongation: 100%. Standards Met: FDA Title 21 Part 175 Subpart B Section 175.105 (Indirect Food Contact). Core: 3-inch diameter.
Tags:ship02
Size - 1/2 in. x 60 yds. (12mm x 55m)