LTERIVER PCI Express to 2-Ports Serial ATA/SATA 3.0 Host Controller Card- Plug and Play on Windows OS, MAC OS and Linux Systems-2X 6Gbps Max SATA 3.0 None Raid Ports-Support AHCI Boot Up (PCE-G2S2)
PCI Express Gen 2 to Serial ATA/SATA III Controller Card-2X 6Gbps SATA III Ports for HDD/SSD LTERIVER PCE-G2S2 is a PCI Express Gen 2 to SATA III (Serial ATA) 6Gbps controller. It will covert PCIE X1 signal to 2-Ports SATA III on desktop PCs and Servers. Allow users add 2X max SATA HDD/SSD on their system for Boot or Storage use. This PCIE SATA III card will support Plug and Play on Windows, Linux, and MAC OS systems, now no need to install driver anymore for PCIE SATA expansion cards. WARNING: 1.This PCE-G2S2 PCIE SATA card no need to install driver, if PCs or Servers cannot find the added-on HDD/SSD and this device, then double check if the mother board PCIE slot is active and open. Some brand mother board may have defined PCIE function when it produced. User better call mother board manufacture locate the problem. 2.PCE-G2S2 was set on AHCI mode. If users using the classic IDE mode, user’s PC will report BSD error. If users do not know which mode is running on PCs, follow steps as below: Windows Device Manage-IDE ATA/ATAPI Controllers- Will see “XXXX SATA AHCI controllers”. SATA III 6Gbps Speed MAC,Linux and Windows System PCIE Gen 2 X1 Interface Read more ASMedia ASM1061 Major Chip SSD/HDD Supported Standard and Slim PCs Supported Read more Industry Specifications Compliance: PCI Express Base Specification Rev. 2.0,Bus Master Programming Interface to IDE ATA Controller Rev. 1.0 PCI Express Card Electromechanical Rev. 2.0,Serial ATA AHCI Spec. Rev.1.3,Serial ATA Revision 3.0 PCI Express Features PCI Express X1 lane for 2.5 and 5GHz signaling,Single virtual channel,SSC support ECRC and Advanced Error Reporting capability,100MHz differential PCI Express reference clock in,Maximum Payload up to 128 bytes Serial ATA Features 2 ports Serial ATA PHY for 1.5, 3.0 and 6.0GHz signaling,Support AHCI mode Support Native Gommand Queue,Support Gen 1m and Gen2m SATAPHY PCE-G2S2 PCE-G2S4 PCE-G2S6 SATA III Ports 2-Ports 4-Ports 6-Ports Boot Mode AHCI AHCI/IDE AHCI SATA Standard SATA III SATA III SATA III HDD/SSD SATA Interface SATA Interface SATA Interface PCIE Standard PCIE Gen2 PCIE Gen2 PCIE Gen2 PCIE Interface PCIE X1 PCIE X1 PCIE X4 Compatible PCs Slim&Standard Slim&Standard Slim&Standard Low Profile Bracket YES YES YES : LTERIVER PCE-G2S2 is a PCI Express Gen 2 to SATA III (Serial ATA) 6Gbps controller. It will covert PCIE X1 signal to 2-Ports SATA III on desktop PCs and Servers. Allow users add 2X max SATA HDD/SSD on their system for Boot or storage use. This PCIE SATA III card will support Plug and Play on Windows, Linux, and MAC OS systems, now no need to install driver anymore for PCIE SATA expansion cards. WARNING: 1.This PCE-G2S2 PCIE SATA card no need to install driver, if PCs or Servers cannot find the added-on HDD/SSD and this device, then double check if the mother board PCIE slot is active and open. Some brand mother board may have defined PCIE function when it produced. User better call mother board manufacture locate the problem. 2.PCE-G2S2 was set on AHCI mode. If users using the classic IDE mode, user’s PC will report BSD error. If users do not know which mode is running on PCs, follow steps as below: Windows Device Manage-IDE ATA/ATAPI Controllers- Will see “XXXX SATA AHCI controllers”. Package: 1X PCE-G2S2,1X User Manual,1X Low Profile Bracket,1X Mount Screw,2X SATA Cable
Product Features
- 1.The PCE-G2S2 PCIE to 2-Ports NONE-RAID SATA III 6Gbps card will allow users add 2X SATA III ports on desktop PCs, servers, and NAS system for HDD/SSD storage expansion or boot use.
- 2.Based on ASMedia ASM1061SATA III (Serial ATA) advantage HCI controller. Privode2X SATA III 6Gbps ports for PCs and Servers.
- 3.Support Plug and Play on Windows, MAC OS, and Linux system. AMD, ARM, INTEL, and MAC platform.
- 4.Complies with Serial ATA Revision 3.0. Support SATA III speed 6Gbps, SATA II speed 3Gbps, SATA 1 speed 1.5Gbps. PCE-G2S2default mode was set on AHCI.
- 5.PCIE Gen2 X1 interface design, will works on PCIEX1, X2, X4, X8, X16 slot. Users need to check if PCs or Servers have at least one PCIE X1 slot on mother board before purchase.
Tags:cocoon
Title - Default Title