MakerFocus Raspberry Pi 4 Battery Pack UPS, RPI Pack Standard(Raspberry Pi Battery, USB Battery Pack Raspberry Pi,) Latest Version V3 Expansion Board Power Supply Type-C for Raspberry 4B 3B+, 3B 2B+
Color:Red MakerFocus Raspberry Pi 4 Battery Pack UPS, RPI Pack Standard(Raspberry Pi Battery, USB Battery Pack Raspberry Pi,) Latest Version V3 Expansion Board Power Supply Type-C for Raspberry 4B 3B+, 3B 2B+ Remarks: UPSPack v3 is the latest model of a new generation of Raspberry Pi UPS uninterruptible power supply expansion board released in September 2020. According to previous iterations of v1 and v2 versions, v3 version is currently the most stable UPS power supply solution for Raspberry Pi.Description: Please check the pictures carefully to understand the product differences between UPS v3 version and v2 version. You will like this latest version of UPS charging board. It has a smart switch function, and with a type-c interface, allowing you to easily connect with the Raspberry Pi 4B. Package Including:1 Raspberry Pi UPS Pack Latest Version V3 1 3.7V 4000mAH Lithium Battery1 package to install screws1 5pin 2.54mm head (for free)
Product Features
- Support charge while discharge: It will not affect the output of UPS power supply when external power outage. Note: If you use UPS to supply power for Raspberry Pi3b/3B+ when it is charging, please ensure that the input power is not lower than 2.5A. Recommended Use: 3V 2.5A power supply. Document link and Assemble video: Please get the link from the product description below
- Two power modes: Outdoor portable model and Indoor UPS power Supply mode: 1) As an outdoor portable power supply, the motherboard is powered by a lithium battery. and he maximum external power supply capacity is: 5.1V. 2.5A. 2)As an indoor UPS power supply mode: MicroUSB plugs into a normal 5V 2A power adapter, and the external output interface(USB-A interface) can output a maximum of 5.1V.3A. Battery size: 70mm x 41mm x 9.5mm
- 4+2LED are designed to show the status of battery power, charge or discharge: 1) 4 Battery power LEDs: Used to show the current battery voltage and power. 2)Power LED: When the switch is turned ON, the LED is lighting, and when it is OFF, LED is off. (used to check whether the power is supplied externally). 3) Charge charging indicator LED: When the UPS is externally charged via the MicroUSB interface, the Charge LED starts to work.
- With Protect Function: the external output port has a self-recovery fuse to prevent the raspberry pi from burning due to an external short circuit. 1) 5V.3A self-recovery fuse: When the two USB output currents total 3A, the self-recovery fuse will be blown. When the external recovery is no load. The 5V output will be automatically restored. 2) PMU over-discharge protection: When the lithium batter voltage is lower than 2.8V, PMU believes that the battery has been over-discharged, it will automat
- Two Output Modes: except for the regular output via the USB port. At strong currents, such as for high loads above 2.5A, the drop in voltage on the USB cable is a problem that can not be ignored. So we provide a 2.54mm head as gift, which is soldered to the Raspberry Pi GPIO 5V interface for direct power supply, to minimize the damaged cable and pressure drop. In the high-power applications, cable damaged will cause lighting bolts on the RPI, you can weld the head to the 2.54mm header interface.
Tags:cocoon
Title - Default Title