NOYITO APDS-9960 APDS9960 RGB Gesture Sensor Module Hand Gesture Recognition Moving Direction Ambient Light RGB Proximity Sensor Module Infrared Move Sensor （Pack of 2）
Description: The APDS-9960 is an ambient light sensor with integrated ambient light sensing, infrared LED and proximity detectors and ambient brightness sensing. Features: 1. It uses a dual photodiode to approximate 0.01 lux illumination to approximate the visual response of the human eye. 2. Programmable interrupt function with upper and lower thresholds, up to 16-bit resolution for high flexibility even after dark glass, proximity sensor fully calibrated for 100 mm object detection, eliminating terminal and sub- components Factory calibration requirements. 3. The ambient light dynamic range has also increased from the previous 10K lux to 30K lux, and the solar calibration has been greatly increased to 50K lux, which greatly improves the sensitivity and avoids strong light interference. 4. With four infrared sensors, you can measure the light reflectance of each basic position over time and convert those changes into gestures. Our interface library can detect directional gestures (left to right, right to left, top to bottom, bottom to top), but theoretically more complex gestures such as zigzag, clockwise or counterclockwise, near to the far distance is achievable. Parameters: Working voltage: 2.4V-3.6V Measuring range: 4-8in (10-20CM) Interface type: I2C interface Pins description: VL (optional power to IR LED), GND (Ground), VCC (power to APDS-9960 sensor), SDA (I2C data), SCL (I2C clock), INT (interrupt). Each APDS-9960 also has a detection range of 4 to 8 inches (10 to 20 cm). Package Included: 2pcs NOYITO APDS-9960 APDS9960 RGB Gesture Sensor Module
Product Features
- This RGB Infrared Gesture Sensor Module: The APDS-9960 is an ambient light sensor with integrated ambient light sensing, infrared LED and proximity detectors and ambient brightness sensing. It uses a dual photodiode to approximate 0.01 lux illumination to approximate the visual response of the human eye.
- Greatly Facilitated Your Structural Design: It can work accurately under the large 1.0mm Air Gap without external isolation processing.
- Its wait state power consumption - 90A typical, sleep mode power - 2.2A typical, more energy efficient; up to 400kHz (I2C fast mode) dedicated interrupt pin, I2C interface compatible, fully integrated solution, convenient structure and circuit design.
- Built-in APDS-9960 sensor for ambient light and color measurement, proximity detection and non-contact gesture detection. With this RGB and gesture sensor, you can control a computer, a microcontroller, a robot, and it's much more powerful than your hand with a simple swipe!
- Working voltage: 2.4V-3.6V. Measuring range: 4-8in (10-20CM). Interface type: I2C interface .
Tags:dingo
Title - Default Title