Power Circuit Probe Tester Polarity Identify Electrical Tester 6V-24V DC Short&Open Circuit Tester Automotive with 13FT Long Test Lead,LED Test Light,Buzzer,High-sensitive Test Pen,Overload Protection
Technical Parameters : Operation Voltage: 6-24V DCOverload Protection: 10AItem Length: 220mm/8.66inchItem Width: 20mm/0.79inchLead Length: approximately 4M /157.5inchMaterial Type: plastic and metalItem Weight: 200g Probe tester is equipped with overload power-off protection. If the current or load is too large during the power distribution process, the test pen will automatically disconnect to protect the battery and give a buzzer warning. Package List： 1pc Circuit tester 1pc User manual (in English) 1pc Packing box
Product Features
- Polarity Identification Electrical TesterThis circuit tester is suitable for diagnostic in all 6V to 24V DC vehicle electrical systems. It can check switches, relays and the on-off of diodes, fuses, wires and circuits, which can help you reduce diagnostic time in automotive electrical systems. This power circuit probe kit can help you quickly identify positive and negative polarity of electric cables and plugs. Red light indicates positive polarity and green light indicates negative polarity.
- Short Circuit Following and Locating & Continuity Testing & Jumper Lead Operation Power TesterIn most cases, short circuit or instant overload of component will lead to blown fuse or circuit breaker tripping. This circuit tester can assist you tracing problem wires and locating breaking points. It can also test for continuity and do the jumper lead operation with the assistance of its auxiliary ground lead.
- Activate and Test Components In/Out of Vehicles Electrical System&Grounding Testing Probe TesterThe circuit tester could activate components in and out of the vehicles electrical system, test and check the components if defective or not, or if rating current of component is higher than that of the circuit tester. For some components, the negative terminal is required to be well grounded to cope with the flow of large currents, this circuit tester is a good tool to test their grounding.
- 13FT Long Test Lead&Buzzer and LED Light Prompt&Highly Sensitive Pen&Strong Clips Power TesterThe test lead of the circuit tracer is about 4m(13ft) which allows you access and test the electrical system easily. The LED indicator and buzzer warning can help you clear problems at a glance. Power circuit probe tester adopts stainless steel probe tip, provides you quick and accurate detection. And its clips with strong bite force which not easy to fall off, providing you better experience.
- Overload Protection&Double Insulation ProtectionThe test pen is equipped with overload power-off protection. If the current or load is too large during the power distribution process, it will automatically disconnect to protect the battery and give a buzzer warning. With its short-circuit protection, you can test for bad ground contacts instantly. The insulation material used in this probe tester has passed the CCC national safety compulsory certification, which is safe and reliable.
- Quick Self-Test & Easy Operation Electric TestersBefore you test a circuit or component, the power circuit probe tester can perform a quick self-test to ensure your tool is in good condition. After a simple hook-up of the circuit tracer to the vehicle's battery, automotive technician can conduct a positive or negative battery current to the tip by rocking the power switch forward or backward. Note: This probe tester do not use on AC voltage.
Tags:dingo
Title - Default Title