RESIONE 3D Printer Resin, F80 Elastic Resin 405nm UV-Curing Resin with High Elongation at Break High Resilience Photopolymer Resin for LCD DLP MSLA 3D Printing (Black, 500g)
F80 is a soft and elastic resin. It is available in black and pink, and the prints can remain soft even in the cold winter. Since soft resin is difficult to print, and the viscosity of this resin is very high, it is not recommended for novices to use it. Cleaning and Post-curing Cleaning tools: Soft brush or Ultrasonic cleaner or 2 in 1Wash Cure Machine Cleaning time: 3mins Cleaning solvent: 95% Ethanol or IPA Post-curing light source: 385-405nm UV(40W) Post-curing time: 4-6min The difference between F80 and F69 Resilience: F80 > F69； Shore hardness, tear strength, elongation at break: F80＜F69; F80 prints can remain soft at low temperatures, F69 prints will become hard. Performance introduction Mechanical Properties Shore Hardness: 50-60A Tensile Strength: 3.8MPa Tear Strength: 9.75KN/m Elongation at Break: 159% Viscosity（25℃）: 2300mpa.s Elastic Modulus: 1.8MPa Printing Settings Layer Height(mm):0.05mm Bottom exposure time: 35-50s Normal exposure time: 1.7-10.2s If you need specific settings, please visit the RESIONE official website Read more Attention! If you do not need to use the resin within 1 day, please pour it into a clean, light-shielded container and keep it tightly sealed. Do not mix the printed resin liquid with the unused resin to avoid contamination of the new resin. Precautions USE： 1. Operating temperature : 20~35℃,68℉~95℉ 2. Shake well before each use. If the resin is very viscous, preheat the bottle with 80℃ warm water before shaking it. 3. Please wear nitrile rubber gloves during operation and keep the operating environment well ventilated. 4. Do not use resin near windows, balconies or other strong ultraviolet environment. 5. If you accidentally get resin into your eyes, mouth or nose, rinse immediately with plenty of water and consult a doctor. 6. The resin remaining on the skin can be washed with soap, hand sanitizer, etc. Waste liquid： 1. If the resin is no longer needed, please pour it into a transparent container (pour a small amount at a time), then place it in the sun to completely cure it. 2. If it is a cleaning fluid containing resin, please do not discharge it directly into the sewer. You can put the cleaning solution in the sun first, wait until the resin inside is completely solidified and precipitated, and then filter out the solid residue, and the filtered cleaning solution can be used continuously. Storage： 1. Store in a sealed, shading, and cool place. 2. Keep away from fire. 3. Keep out of reach of children. 4. If you do not need to use the resin within 1 day, please pour it into a clean, light-shielded container and keep it tightly sealed. Do not mix the printed resin liquid with the unused resin to avoid contamination of the new resin. F69 Flexible Black Rubber-like Resin K Black Tough Resin M58 Grey Tough&Hard Resin G217 Clear Non-yellowing Tough&Hard Resin W90B Water-washable Resin M70 High-precision Resin Shore Hardness 60~75A 50-60A 87D 90D 82D 89D Tensile Strength 7.9MPa 3.8MPa 48.3D 65.3MPa 35.66MPa 32MPa Viscosity（25℃） 980mpa.s 2300mpa.s 307mpa.s 396mpa.s 139mpa.s Viscosity（28℃）:590mpa.s Elongation at Break 255.1% 159% 12.30% 10.40% 18% 9%
Product Features
- Soft touch F80 resin prints have a Shore hardness of 50-60A, soft to the touch, full of elasticity. Pink F80 resin is perfect for making dental gum models
- Good resilienceF80 resin prints have good resilience, and they can quickly recover their shape after deformation.
- Low temperature resistanceEven in the cold winter below 10C, F80 prints still remain soft, although their elasticity will decrease as the temperature decreases.
- Broad adaptabilityF80 resin is suitable for all mainstream LCD/MSLA/DLP 3d printers on the market, including RGB or Mono screen printers.
- Difference between F80 and F69Restoring force: F80> F69.Shore hardness, tear strength, breaking elongation: F80< F69. F80 remains soft at low temperatures and F69 becomes hard. NOTE: Please refer to our instruction manual before use.
Tags:workwarehouse
Title - Default Title