RESIONE W90B Water Washable 3D Printer Resin Almost Odorless LCD UV-Curing Resin 405nm Standard Photopolymer Resin for DLP MSLA LCD 3D Printing (Transparent Orange, 500g)
W90B 3d printer resin is a water-washable resin, almost no smell,it has 6 optional colors. The white/black/gray color prints are reflective on the surface, and the transparent blue/transparent orange/transparent color prints are still transparent after cleaning. The wavelength range is 385-405nm, suitable for mainstream LCD/MSLA/DLP 3d printers on the market, such as: a full range of Nova3d, Longer3d, QIDI TECH, Phrozen, Creality, Anycubic, Elegoo resin 3d printers. Note: The shelf life of our product is 1 year, but it can actually be used for 2 years. Please feel relieved to use it W90B Water Washable Resin Printing Settings Layer Height(mm):0.05mmBottom exposure time: 30-45sNormal exposure time: 1.2-10s If you need specific settings, please visit the RESIONE official website Cleaning and Post-curing Cleaning tools: No tools neededCleaning time: 1minCleaning solvent: WaterPost-curing light source: 385-405nm UV(40W)Post-curing time: 10min Notice!!! Cleaning: Just place the print in the water and shake it back and forth.After cleaning the prints,use a hair dryer or high-pressure air gun to dry it.Do not place the w90b prints in water or humid environment.Do not discharge the cleaned waste liquid into the sewer,please put it in the sun first,filter out the solidified material,and then discharge it. Resin Parameters Shore Hardness:82D Tensile Strength:35.66MPa Flexural Strength:38.07MPa Elongation at Break:18% Viscosity（25℃）:139mpa.s Notched IZOD:16.5J/m Read more Prints can be washed with water W90B 3d printer resin uses water-based raw materials, and the uncured resin on the surface of the prints can be directly dissolved in water, which is convenient and economical to clean. Keep away from irritating solvent No need for alcohol or IPA,reducing the irritation of solvents to the human body.Safe and healthy. Nice appearance and color The white/black/gray color prints are reflective on the surface, and the transparent blue/transparent orange/transparent color prints are still transparent after cleaning. Read more Precautions USE： Operating temperature : 20~35℃,68℉~95℉Shake well before each use. If the resin is very viscous, preheat the bottle with 60℃ warm water before shaking it.Please wear nitrile rubber gloves during operation and keep the operating environment well ventilated.Do not use resin near windows, balconies or other strong ultraviolet environment.If you accidentally get resin into your eyes, mouth or nose, rinse immediately with plenty of water and consult a doctor.The resin remaining on the skin can be washed with soap, hand sanitizer, etc.Caution for people allergic to acrylics. Waste liquid： If the resin is no longer needed, please pour it into a transparent container (pour a small amount at a time), then place it in the sun to completely cure it.If it is a cleaning fluid containing resin, please do not discharge it directly into the sewer. You can put the cleaning solution in the sun first, wait until the resin inside is completely solidified and precipitated, and then filter out the solid residue, and the filtered cleaning solution can be used continuously. Storage： Store in a sealed, shading, and cool place.Keep away from fire.Keep out of reach of children.If the resin is not used in the 3D printer for more than 1 day, it is recommended to filter the resin with a filter funnel and pour it into an empty container. Do not pour the resin in the resin tank back to the original bottle to avoid contamination of other resins. F69 Flexible Black Rubber-like Resin M58 Grey Tough&Hard Resin K Black Tough Resin M70 High-precision Resin G217 Clear Non-yellowing Tough&Hard Resin F80 Black Elastic Resin Shore Hardness 60~75A 87D 82D 89D 90D 50-60A Tensile Strength 7.9MPa 48.3D 48.5MPa 32MPa 65.3MPa 3.8MPa Viscosity（25℃） 980mpa.s 307mpa.s 307mpa.s Viscosity（28℃）:590mpa.s 396mpa.s 2300mpa.s Elongation at Break 255.1% 12.30% 16.80% 9% 10.40% 159%
Product Features
- Prints can be washed with waterW90B 3d printer resin uses water-based raw materials, and the uncured resin on the surface of the prints can be directly dissolved in water, which is convenient and economical to clean.
- Keep away from irritating solventNo need for alcohol or IPA,reducing the irritation of solvents to the human body.Safe, healthy and environmentally friendly.
- Nice appearance and colorThe white/black/gray color prints are reflective on the surface, and the transparent blue/transparent orange/transparent color prints are still transparent after cleaning.
- Almost odorlessRESIONE insists on using high-quality raw materials. The raw materials of W90B have almost no odor and no volatile and irritating harmful substances. It is convenient to use at home and office.
- Comply with RoHS and SVHC(REACH) regulationsW90B resin is fully compliant with RoHS 2.0 and SVHC (REACH) regulations, proving that the raw materials do not contain more than 200 chemical hazardous substances contained in the regulations.
Tags:workwarehouse
Title - Default Title