SunnyPro ELPLP96 Replacement Projector Lamp with Housing Compatible with Epson Powerlite Home Cinema 2100 2150 1060 660 760hd VS250 VS350 VS355 EX9210 EX9220 EX3260 EX5260 EX7260 X39 W39 S39 109W
Projector Lamp Type: Projector lamp with Housing Compatible with Projector models: Epson EB-108 EB-2042 EB-2142W EB-2247U EB-960W EB-970 EB-980W EB-990U EB-S05 EB-S39 EB-S41 EB-U05 EB-U42 EB-W05 EB-W39 EB-W42 EB-X05 EB-X39 EB-X41 EH-TW5600 EH-TW5650 EH-TW650 EX5260 Home Cinema 1060 Home Cinema 2100 Home Cinema 2150 Home Cinema 660 Home Cinema 760 PowerLite 1266 PowerLite 1286 PowerLite X39 VS250 VS350 VS355 Read more Step 1. Unplug the power cord from your projector and let the lamp cool down. Step 2. Locate the lamp access panel on your projector and remove the screws and access panel. Step 3. Remove any screws holding the lamp housing into the projector. Step 4. Reach in and firmly pull the lamp housing out of the projector. Step 5. Place the new lamp housing into the projector in the same orientation as you removed the old lamp. Step 6. Wiggle the lamp into place and make sure full contact is made inside of the projector. Step 7. Replace the lamp mounting screws to secure the lamp into the projector. Step 8. Replace the lamp access panel and secure the screws. Step 9. Plug in your projector and power it on. Step 10. Reset the lamp counter. Some lamps will reset the lamp counter automatically when a new lamp is placed in. Read more Where is My Projector Lamp Located A projector lamp can be found by locating a square or rectangular plastic plate somewhere on the outside of the projector; the plate is usually on the bottom of the projector, but can sometimes be found on the top or sides. This cover is usually secured by two screws; undo these screws and lift the plate off to reveal the bottom of the plastic housing (the module) that holds the projector lamp in place in your projector. This plastic housing usually has a handle attached to it. Pull gently on this handle to remove the projector lamp from your projector. It is time to replace the lamp when: Picture has become dull and lacks brightness. There is an obvious decline in picture clarity and sharpness. Your lamp is flickering. There is difficulty or a delay when turning the machine on. A light comes on that warns you that it may be time to change your lamp. Note: 1. Let the lamp cool down before replacing it. If the lamp breaks, handle the shards carefully to avoid injury. 2. Do not touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure. 3. Be sure to seat the lamp fully and secure the lamp cover. If the lamp is not properly installed or the cover is loose, the lamp will not turn on. Read more
Product Features
- Compatible with epson Powerlite Home Cinema 2100 2150 1060 660 760hd VS250 VS350 VS355 EX9210 EX9220 EX3260 EX5260 EX7260 X39 W39 S39 109W
- Projector Lamp with Housng
- All lamps are produced by our own factory
- All lamps are tested at our factory before leaving the facility
- Cheaper Bare Lamp without Housing Also Available for Sale
Tags:cocoon
Title - Default Title