Unasco Anti-Seize Copper, Nickel or Ceramic Tape: 1/2 in. x 50 ft. (Nickel)
Unasco Anti-Seize Copper, Nickel, or Ceramic Tape is designed to aid in the assembly and disassembly of threaded components in applications where an anti- seize compound would be inefficient or not compatible due to contamination risks. Unasco's Anti-Seize Tapes are manufactured from PTFE resin mixed with metal or ceramic flakes. These flakes act as slide or bearing plates between the two mating surfaces, resulting in excellent lubricity which prevents galling and seals threads to protect them from corrosion, dirt, and grit. These tapes are resistant to a broad range of chemicals and are compatible with a wide range of metals. Copper is intended for use in general purpose applications, nickel is meant for use on stainless steel, and ceramic is to be used in instances where a metal-filled tape isn’t appropriate. Features & Benefits • Resistant to a broad range of chemicals such as strong alkaline solutions, most chemical and acid vapors, road salt, steam, salt, and iodized water.- Compatible with a wide range of metals including galvanized steel, steel, iron, brass, copper, aluminum, titanium, and magnesium. Note: use either Nickel or Ceramic Anti-Seize Tape when working with stainless steel to prevent corrosion.- Effective across a broad range of temperatures- Non-toxic- Non-flammable Application InstructionsFor fittings up to 1-1/2 inch / 38mm diameter • Use 1/2 inch / 12mm wide tape.- Clean the male and female threads thoroughly.- Wrap the tape around the male thread. Take care to keep the tape under tension as you are wrapping so the tape moulds itself into the root of the thread.- Make sure that you wrap with the thread.- Make sure that the tape does not overlap the end of the fitting.- Three wraps seal most threads. Note. For poor quality or damaged threads or threads that are hard to seal like parallel threads or threads on fittings s
Product Features
- Unasco Anti-Seize Copper, Nickel, or Ceramic Tape is designed to aid in the assembly and disassembly of threaded components in applications where an anti-seize compound would be inefficient or not compatible due to contamination risks.
- Unasco's Anti-Seize Tapes are manufactured from PTFE resin mixed with metal or ceramic flakes. These flakes act as slide or bearing plates between the two mating surfaces, resulting in excellent lubricity which prevents galling and seals threads to protect them from corrosion, dirt, and grit.
- Resistant to a broad range of chemicals such as strong alkaline solutions, most chemical and acid vapors, road salt, steam, salt, and iodized water. Compatible with a wide range of metals including galvanized steel, steel, iron, brass, copper, aluminum, titanium, and magnesium. Note use either Nickel or Ceramic Anti-Seize Tape when working with stainless steel to prevent corrosion.
- All tapes are sold separately. Copper is intended for use in general purpose applications, nickel is meant for use on stainless steel, and ceramic is to be used in instances where a metal-filled tape isnt appropriate.
- Carrier/Backing: 100% Teflon PTFE. Adhesive: N/A. Service/Operating Temperature: -450F to 500F. Elongation: 100%. Density (standard): 0.8 gm/cm cubed.
Tags:ship02
Title - Default Title