Vantrue 11.5ft Mini USB Dash Cam Hardwire Kit with 12V-24V to 5V Fuse Holders, Low Voltage Battery Drain Protection, Compatible with Apeman, Rexing, Toguard, Vantrue N2 Pro, N2, T2, N1 Pro, X4 Cameras
Vantrue N2 Pro Uber Dual Dash Cam Vantrue T2 Supercapacitor Dash Cam Vantrue N1 Pro Dash Cam Vantrue N2 Uber Dual Dash Cam Vantrue X4 4K Capacitor dash cam Resolution Dual:19201080 60fps, Single Front 1920x1080 60fps or 2560x1440 30fps 1920x1080 30fps 1920X1080 30fps Dual:1440x1080 30fps+1280x720 30fps, Single Front 1920x1080 30fps 4K 3840X2160P 30fps, 2560X1440P 60fps 2560x1440 30fps Lens F/1.8,170°+ F/2.0, 140° F/1.8, 160° F/1.8, 160° F/2.0, 170°+ F/2.0, 140° F/1.8, 160° Camera Type Front+Inside Front Front Front+Inside Front Display 1.5“ inch 2“ inch 1.5“ inch 1.5“ inch 3“ inch Microphone & Speaker Built-in Built-in Built-in Built- in Built-in Storage Up to 256GB MicroSD Card Up to 256GB MicroSD Card Up to 256GB MicroSD Card Up to 64GB MicroSD Card Up to 256GB MicroSD Card Battery & Charging Built in battery Supercapacitor Built in battery Built in battery Supercapacitor GPS Logger Optional Optional Optional Optional Optional Read more Key Features 24/7 Parking Surveillance Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot. Directly to the ignition wire for power only so it can turn on and off with the ignition. Compatible 12 – 24V Vehicles This hardwire kit accepts voltage from any type of vehicles runs on 12 – 24V, works perfect for car, truck, bus, suvs, or big rig for continuous power. Low Voltage Protection Smart low voltage protection automatically shut off the power to your dash cam when the battery voltage drops to 11.6V(12V cars) or 23.2V(24V cars), thus preventing it draining the battery. Read more Installation Instruction Find the Correct Fuse Slot Open the fuse box, find the correct fuse slot for your hardwire kit. If you need to find an ignition switched fuse, put the key in the vehicle, find the fuse which is not lit up while the car is off, and test it by turning the car on to see if it lights up. If your kit requires constant power, turn off the car and remove the key to see which fuse slots stays lit on. Connect the Red Wire Once you've determined which fuse slots you need to use for your hardwiring kit you can crimp the red wire of your hardwire kit onto the Add-A-Fuse. Gently remove the fuse you identified. Install the fuse you just removed into the installation kit add-a-fuse circuit. Plug the add-a- circuit into the fuse box in the correct orientation. Ground the Hardwiring Kit Slip the black wire (which is in the shape of a C) under a metal bolt or screw in your vehicle (this is the ground wire). Check that it is not attached onto plastic parts. You will typically need a socket wrench to loosen the nut or bolt that you choose to ground with. To attach the grounding terminal, loosen the nut or bolt enough to slip it in and tighten it back up afterwards. Read more Key Features Compatible with 12-24Vdc for car or truck installations. Perfect for 24/7 Parking Surveillance.Low voltage protection protects against battery dying.Compatible with Apeman, Rexing, Toguard, Vantrue N2 Pro, N2, N1 Pro, T2, X4, X3, X1 and all the other mini usb dash cams! Keep 12V or 24V outlet free, charge your phone at the same time.Less static when you’re listening to the radio. Less Complicated Install with the installation video. What’s in the box Vantrue 11.5ft Mini USB Dash Cam Hardwire Kit with User ManualMini/LP ACN Add-A-Circuit Fuse HolderMini ACS Add-A-Circuit Fuse HolderATO ACU Add-A-Circuit Fuse HolderMicro2 Add-A-Circuit Fuse Holder Technical Details Connector: Mini USB Connector Input Voltage: DC 12V-24V Output Voltage: 5V Output Current: 2A Working Temperature: -22°F to 167°F (-30°C to 75°C) Cable Length: 11.5ft Low Voltage Protection: 11.6V for 12V vehicle; 23.2V for 24V vehicle. Read more
Product Features
- Compatible 12 24V VehiclesThis hardwire kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12 24V.
- 24/7 Parking Surveillance without draining the batteryDirectly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot. With the smart low voltage protection, it will automatically shut off the power to your dash cam when the battery voltage drops to 11.6V or 23.2V, thus preventing it draining the battery. Note: If your car requires a start voltage higher than 11.6V for 24 hours parking mode, this hardwire kit may not work for your car.
- Power SupplyDirectly to the ignition wire for power only so it can turn on and off with the ignition and you don't have to worry about plugging in the charger, or turning the dashcam on, or any such stuff.
- Mulitiple usesMini USB plug compatible with all mini usb dash cams such as Apeman, Rexing, Toguard, Vantrue N2 Pro/N2/X3/T2/N1 Pro/X1/X4, GPS navigator and radar detector etc, it always frees up the cigarette lighter for other devices. Please note: It doesn't work for Vantrue S1 Dash Cam.
- Easy to Install4 add a fuse holders included, simply find the right one for your car. Installation instruction and video included, easy to install.
Tags:cocoon
Title - Default Title